TOUHFAN 12 Computer case Fan 12 cm Black, Gray 1 pc
120 x 120 x 25 mm - 2500 RPM - Hydraulic Bearing Gen.2 - 4-pin PWM ( CL-F121-PL12GM-A )
Brand: Thermaltake
SKU: CL-F121-PL12GM-A
$0.00
Price as listed. Shipping charges calculated at checkout.
Out of stock
Do you have any question about this product or its specs? Want to know more? Click here to contact our pre-sales consultant and make the right purchase.
NOTE: The information below is provided for your convenience only; the accuracy of the specifications cannot be guaranteed. However, if necessary, please check with us before purchasing. Data provided by 1 World Sync.
General
Type
Fan
Fan diameter
12 cm
Rotational speed (min)
500 RPM
Rotational speed (max)
2500 RPM
Noise level (high speed)
28.1 dB
Maximum airflow
72.69 cfm
Maximum air pressure
3.78 mmH2O
Bearing type
Hydraulic
Product colour
Black, Grey
Thermaltake TOUGHFAN 12. Type: Fan, Fan diameter: 12 cm, Rotational speed (min): 500 RPM, Rotational speed (max): 2500 RPM, Noise level (high speed): 28.1 dB, Maximum airflow: 72.69 cfm, Maximum air pressure: 3.78 mmH2O, Bearing type: Hydraulic. Product colour: Black, Grey
| Estimate Gross Weight | 0.322 |
|---|
https://www.thermaltake.com/toughfan-12-turbo-high-static-pressure-fan-single-pack.html
Thermaltake TOUGHFAN Turbo is a PWM controlled high static pressure fan with a maximum operating speed of up to 2500 RPM, fulfilling users’ high-end cooling needs.
Superb Cooling Performance at 2500 RPM
TOUGHFAN Turbo is a PWM controlled fan with a maximum operating speed of up to 2500 RPM, bringing our users the ultimate cooling experience.
Exceptional Grey Fan Blades
Featuring high tensile strength and low thermal expansion coefficient material, the THOUGHFAN Turbo is designed with grey colored liquid crystal polymer (LCP) made fan blades, minimizing vibration when the fan operates at full speed.
Metal-Reinforced Motor Hub
The TOUGHFAN’s center is constructed with a full steel motor hub providing enhanced stability and durability.
2nd Generation Hydraulic Bearing
The 2nd generation hydraulic bearing incorporates a new shaft design with inside etches allowing preservation of lubricant on both sides whilst reducing noise during operation. Lowering audible levels and extending lifespan.
High Air Pressure and High Airflow
TOUGHFAN Series is designed to produce high static pressure and airflow, providing users impeccable cooling results.
TOUGHFAN 12 Turbo – 72.69 CFM/ 500~2500 R.P.M/ 3.78 mm-H2O
TOUGHFAN 14 – 119.1 cfm/ 500-2000 R.P.M/ 3.54 mm-H2O
TOUGHFAN 12 – 58.35 cfm / 500-2000 R.P.M/ 2.41 mm-H2O
Anti-Vibration Mounting System
The in-mold injection anti-vibration rubber pads dampen the vibration of the fan allowing the fan to spin at higher levels without compromising noise levels. The fan is designed with 80% coverage for all corners, maintaining low noise levels when in operation.
Thermaltake TOUGHFAN Turbo is a PWM controlled high static pressure fan with a maximum operating speed of up to 2500 RPM, fulfilling users’ high-end cooling needs.
Superb Cooling Performance at 2500 RPM
TOUGHFAN Turbo is a PWM controlled fan with a maximum operating speed of up to 2500 RPM, bringing our users the ultimate cooling experience.
Exceptional Grey Fan Blades
Featuring high tensile strength and low thermal expansion coefficient material, the THOUGHFAN Turbo is designed with grey colored liquid crystal polymer (LCP) made fan blades, minimizing vibration when the fan operates at full speed.
Metal-Reinforced Motor Hub
The TOUGHFAN’s center is constructed with a full steel motor hub providing enhanced stability and durability.
2nd Generation Hydraulic Bearing
The 2nd generation hydraulic bearing incorporates a new shaft design with inside etches allowing preservation of lubricant on both sides whilst reducing noise during operation. Lowering audible levels and extending lifespan.
High Air Pressure and High Airflow
TOUGHFAN Series is designed to produce high static pressure and airflow, providing users impeccable cooling results.
TOUGHFAN 12 Turbo – 72.69 CFM/ 500~2500 R.P.M/ 3.78 mm-H2O
TOUGHFAN 14 – 119.1 cfm/ 500-2000 R.P.M/ 3.54 mm-H2O
TOUGHFAN 12 – 58.35 cfm / 500-2000 R.P.M/ 2.41 mm-H2O
Anti-Vibration Mounting System
The in-mold injection anti-vibration rubber pads dampen the vibration of the fan allowing the fan to spin at higher levels without compromising noise levels. The fan is designed with 80% coverage for all corners, maintaining low noise levels when in operation.
0.0
0 review(s)
Inside NetworkDistri
From our network to yours.
Every day, technology moves through our operation — received, checked, prepared and dispatched to customers. The images below show real equipment handled through our operation, not stock photography.
Real operations
Technology we actually handle
01
Source
Global supply
02
Receive
Goods arrive
03
Prepare
Process & pack
04
Dispatch
On the way
